Skip to main content
  • The “non-absorbent” division develops its core competence focus on non-absorbent surfaces. Through this specialism, we achieve the highest expertise and precision.

  • By combining innovative materials with well-established foundation technologies, we create intelligent hybrid systems (INTELLIGENT HYBRIDS®) that set new benchmarks in respective markets.

Nanoflex® VP 20 Nanoflex® VP 20 gives non-absorbent, mineral surfaces such as glass, ceramic or polished natural stone a reliable non-stick performance, particularly against limescale, urine scale, soap residues and other hygiene products.

Its water and dirt-repellent properties extend the scope of application to automotive glass, solar and building protection.

The strong chemical bond to the OH surface groups guarantees outstanding permanence to weather resistance, as well as mechanical and chemical durability.

Through the intelligent arrangement of hybrid (organic and inorganic) structures, Nanoflex® VP 20 constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

Specification
Chemical basis:modified silicon dioxide
Layer thickness:approx. 100 - 120 nm
Water resistance:between 105° and 115° (20μl)
Oil resistance:between 80° and 85° (20μl)
Slip angle:< 25°
Temperature stability:250°C permanent, 450°C peak
Chemical stability:between pH 1 and pH 13
Weather resistance:3500h pursuant to ISO 11507 A
Durability (mechanical):> 20,000 cycles pursuant to ISO 11998
Salt water resistant:yes
Transparency:100%
Storage stability:2 years
Temperature sensitivity:-3°C to 30°C
Consumption:5 ml/m2
Application:Drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Polish until the surface is dry and free of visible streaks. The coating is waterproof after 1 hour and fully cured after 24 hours.

Nanoflex® VP 20 is also available in VP 16, VP 12 and H9 quality grades. A fluorine free version can be supplied (Nanoflex® Optiperl 45). These formulae contain a lower percentage of active components. The product is ethanol-based and a hazardous material according to ADR and IATA, however, it can be shipped as a solvent-free liquid concentrate.

Please observe the relevant safety data sheet when using Nanoflex® VP 20.

Nanoflex® Dura Nanoflex® Dura gives non-absorbent surfaces, particularly painted, stainless steel or plastic surfaces reliable protection against contaminants, graffiti, acid and oxidisation. Hence polished natural stone (kitchen worktops) can be protected from acid corrosion.

Its barrier properties extend the scope of application to automotive glass, solar, timber and building protection.

The strong chemical bond to the OH surface groups guarantees outstanding permanence in relation to weather resistance, as well as mechanical and chemical durability.

Through the intelligent arrangement of hybrid (organic and inorganic) structures, Nanoflex® Dura constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

 

Specification
Chemical basis:modified pre-ceramic
Layer thickness:approx. 600 - 3000 nm
Water resistance:between 100° and 110° (20μl)
Oil resistance:no
Slip angle:< 20°
Temperature stability:600°C permanent
Chemical stability:between pH 1 and pH 13
Weather resistance:3500h pursuant to ISO 11507 A
Durability (mechanical):> 30,000 cycles pursuant to ISO 11998
Salt water resistant:yes
Transparency:100%
Storage stability:1 year
Temperature sensitivity:2°C to 30°C
Consumption:10 ml/m2
Application:drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Spread across the surface with a light polishing motion. After approx. 1-3 minutes visible streaks are removed with gentle polishing motions. This highperformance coating is waterproof after 24 hours and fully cured after 7 days.

Nanoflex® Dura is also available in the VOC-reduced version Dura-VF and in the ultradense version Dura Ultra. The product is solvent-based and has an ammonia based aroma. It is a hazardous material according to ADR and IATA. This complex technology cannot be diluted.

Please observe the relevant safety data sheet when using Nanoflex® Dura.

Nanoflex® SG 70 Nanoflex® SG 70 gives sand-blasted or etched glass surfaces a permanent anti-fingerprint finish. Thanks to optimum filling of the structure, grease and dirt becomes invisible and can be easily removed.

There is barely any visible shading of the protected glass. Privacy protection through opaqueness is not impaired.

Once fully cured Nanoflex® SG 70 is resistant to conventional solvent-based glass cleaners.

Through the intelligent arrangement of hybrid structures of organic chemicals, Nanoflex® SG 70 constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

 

Specification
Chemical basis:modified silicon dioxide
Layer thickness:> 5000 nm
Water resistance:no
Oil resistance:no
Slip angle:not applicable
Temperature stability:100°C permanent
Chemical stability:between pH 3 and pH 9
Weather resistance:3500h pursuant to ISO 11507 A
Durability (mechanical):> 5,000 cycles pursuant to ISO 11998
Salt water resistant:yes
Transparency:100%
Storage stability:2 year
Temperature sensitivity:2°C to 30°C
Consumption:15 ml/m2
Application:Drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Disperse across the surface with light polishing motions. Visible streaks can be removed immediately through gentle polishing motions. The coating is waterproof and fully cured after 24 hours.

Nanoflex® SG 70 is not available in any other versions. The product is solvent-based - spray application is not recommended. The product is non-hazardous according to ADR and IATA. This complex technology cannot be diluted.

Please observe the relevant safety data sheet when using Nanoflex® SG 70.

Nanoflex® Antifog Nanoflex® Antifog is a cleaner for weekly or monthly use. It gives non-absorbent surfaces such as glass or plastic a reliable anti-misting performance, which prevents condensation.

Nanoflex® Antifog creates an ultra-hydrophilic film on the cleaned surface, which allows the finest droplets of water vapour to be widely dispersed across the surface.

After cleaning a protective film remains that is not chemically bonded to the surface. This must be re-applied after mechanical abrasion or being subjected to large volumes of water.

Through the intelligent arrangement of organic chemical and bionic hybrid structures, Nanoflex® Antifog constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

 

Specification
Chemical basis:modified silicon dioxide
Layer thickness:approx. 100 - 120 nm
Water resistance:1°-5° (20μl)
Temperature stability:100°C permanent
Chemical stability:no
Weather resistance:no
Durability (mechanical):no
Transparency:100%
Storage stability:2 year
Temperature sensitivity:-3°C to 30°C
Consumption:5 - 15 ml/m2
Application:Drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Clean the substrate until free of dirt particles. The anti-mist effect is only maintained through ongoing application of Nanoflex® Antifog to the clean surface. The surface should not be buffed, but left to air-dry as a film.

Nanoflex® Antifog is available as an ethanol or water-based product. The water-based version should be buffed. The product is available as a liquid concentrate, dilution rate 1:299 (ethanol-based) or 1:9 (water-based).

Please observe the relevant safety data sheet when using Nanoflex® Antifog.

Top Ceram® RAK 300 Top Ceram® RAK 300’s barrier properties protect the micro-porosity of polished porcelain stoneware.

Due to the nature of manufacture, polished or semi-polished porcelain stoneware is highly susceptible to dirt due to the opening of the surface during the polishing process. Previously concealed air pockets are now exposed, enabling dirt and paint particles to adhere. This causes almost irreversible damage: Tiles have to be stripped with a diamond grinder to repair.

Top Ceram® RAK 300 reliably prevents the adhesion of dirt and paint particles. The “permanent marker test” is normally used to validate the performance : If the permanent marker can be completely removed with ethanol, the tile is protected.

Through the intelligent arrangement of hybrid (organic and inorganic) structures, Top Ceram® RAK 300 constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

 

Specification
Chemical basis:modified silicon dioxide
Layer thickness:approx. 300 nm
Water resistance:approx. 90° (20μl)
Oil resistance:no
Slip angle:< 25°
Temperature stability:150°C permanent
Chemical stability:between pH 1 and pH 13
Weather resistance:3500 h pursuant to ISO 11507 A
Durability (mechanical):> 100,000 cycles pursuant to ISO 11998
Salt water resistant:yes
Transparency:100%
Storage stability:2 year
Temperature sensitivity:-3°C to 30°C
Consumption:5 ml/m2
Application:Drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Polish until the surface is dry and free of visible streaks. The coating is waterproof after 12 hours and fully cured after 24 hours.

Top Ceram® RAK 300 is available in only one formulation. The product is based on non-flammable solvents. It is a non-hazardous material according to ADR and IATA. This complex technology does not permit dilutions.

Please observe the relevant safety data sheet when using Top Ceram® RAK 300.

Nanoflex® Clear View Nanoflex® Clear View is a concentrate; dilution creates water and dirt-repellent strengths for non-absorbent surfaces, which are very easy to apply.

The greatest cost factors in surface protection are normally application costs. Time and effort usually influence the calculation by more than 70%.

Nanoflex® Clear View delivers reliable protection against rain, water and dirt - with
no need to buff. The diluted concentrate can also be used to clean dirty surfaces. Nanoflex® Clear View is therefore an ideal detergent in car windscreen washers or as a finish in car wash facilities.

Through an intelligent application performance, Nanoflex® Clear View constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

 

Specification
Chemical basis:modified silicon dioxide
Layer thickness:approx. 150 nm
Water resistance:approx. 95° (20μl)
Oil resistance:no
Slip angle:< 10°
Temperature stability:100°C permanent
Chemical stability:between pH 3 and pH 9
Weather resistance:500 h pursuant to ISO 11507 A
Durability (mechanical):> 1000 cycles pursuant to ISO 11998
Salt water resistant:yes
Transparency:100%
Storage stability:2 years
Temperature sensitivity:-3°C to 30°C
Consumption:15 ml/m2 (diluted concentrate)
Application:Simple spray-on application is all that’s required. When used in windscreen washers, the wipers disperse the product across the windscreen, streak-free.

Nanoflex® Clear View is a concentrate. For use in windscreen washers, dilutions of 1% in an ethanol-water mixture (10/90) is recommended. The concentrate is a hazardous material according to ADR and IATA.

Please observe the relevant safety data sheet when using Nanoflex® Clear View.